|Forum Home > Layout Gallery - GuitarPCB Build Documents, Mods and Tips > Order Switching Board - 3PDT Toggle Version|
The FXCT is a small switching circuit that allows you to change the order of two external circuits. Switching is achieved via a 3PDT On-On toggle switch.
For example in a combo pedal you may want the Booster before a Drive and then switch it to place the Drive first for a completely different tone in the same enclosure. This way you can mix and match combo pedals in so many different ways, that your imagination is the only limitation.
Easy for everyone!
Add to this the switching board will save you time and wiring while adding tidiness to your build. This version uses the 3PDT Toggle switch which must be sourced separately. No LED.
The other Easy Order Switching Board which uses a Footswitch instead of a Toggle and LED can also be found in the PCB Shop Pages under Easy Order Switching Board 4PDT
Welcome to my informational signature:
See our Home Page for all Guides!
Check the Layout Gallery section of the Forum and find your project before building.
Troubleshoot threads must have pictures and voltages.
All builds are 100% verified. Be sure to use Genuine Transistors and IC's
Any serious builder should have an Audio Probe to diagnose problems quickly.
When using our Photo Gallery:
Our site will also accept direct links from many other photo host sites as long as they are direct links which must end in .jpg, .png etc. to work.