|Forum Home > Layout Gallery - GuitarPCB Build Documents, Mods and Tips > Order Switching Board - 4PDT w/ LED version|
4PDT Order Switching Boards - FXCF
FXCF is a small switching circuit that allows you to change the order of two external circuits.
For example in a combo pedal you may want the Booster before a Drive and then switch it to place the Drive first for a completely different tone in the same enclosure. This way you can mix and match combo pedals in so many different ways, that your imagination is the only limitation.
Easy for everyone!
Add to this the switching board will save you time and wiring while adding tidiness to your build.
Board Dimensions (W x H) 1.43” x 1.13” ca. 36.2 mm x 28.6mm
Welcome to my informational signature:
See our Home Page for all Guides!
Check the Layout Gallery section of the Forum and find your project before building.
Troubleshoot threads must have pictures and voltages.
All builds are 100% verified. Be sure to use Genuine Transistors and IC's
Any serious builder should have an Audio Probe to diagnose problems quickly.
When using our Photo Gallery:
Our site will also accept direct links from many other photo host sites as long as they are direct links which must end in .jpg, .png etc. to work.