|Forum Home > Layout Gallery - GuitarPCB Build Documents, Mods and Tips > ColorTone Bass Fuzz|
Layout by Bruce R.
Based on the ColorSound® BassFuzz™, with a tone-boost circuit based on the GuitarPCB.com Stage 3 booster connected to the end of the circuit. We feel our implementation of this vintage NPN fuzz with the addition of a booster sets us apart from the rest and overcomes the chief complaint of the BassFuzz™, a low output level.
If you love Fuzz Tones on Bass, we added something special to a classic.
The Demo below uses a $169 Squire passive bass into a transistor Ampeg head.
Board Dimensions (W x H) 1.95 x 1.8 inches, i.e.: 49.5 x 45.7mm.
This design will fit into a 1290NS/1590B size enclosure or larger.
Welcome to my informational signature:
See our Home Page for all Guides!
Check the Layout Gallery section of the Forum and find your project before building.
Troubleshoot threads must have pictures and voltages.
All builds are 100% verified. Be sure to use Genuine Transistors and IC's
Any serious builder should have an Audio Probe to diagnose problems quickly.
When using our Photo Gallery:
Our site will also accept direct links from many other photo host sites as long as they are direct links which must end in .jpg, .png etc. to work.