GuitarPCB.com

Guitar Pedal Projects. Top 5 in DIY With Forum Support!

Forums

Post Reply
Forum Home > Layout Gallery - GuitarPCB Build Documents, Mods and Tips > V6 - Tonmann Design

Barry
Site Owner
Posts: 8793

Whether you want some Medium Gain Drive Tones or Kick it into Over Drive this new circuit design will get it done. The key that makes this circuit so special is that it is very articulate by nature letting each note of a chord be heard clearly through the mix.


Many medium and higher gain tones available with plenty of sustain in a Voxy style guitar pedal circuit. Plenty of tone control as well, with separate Volume, Drive, Treble and Bass controls.


Board Dimensions approximately 2.2" x 1.7"


This one in my opinion is a must have!


Youtube Video:

https://www.youtube.com/watch?v=JVRFybu4FbY


Les Paul Demo with Clean Twin Amp and some Reverb


V6 Build Documents


Finished Build Threads:

http://www.guitarpcb.com/apps/forums/topics/show/13007155

http://www.guitarpcb.com/apps/forums/topics/show/9534431

http://www.guitarpcb.com/apps/forums/topics/show/9364982



Check the Forum for answers to many questions before posting a troubleshoot thread.

Do not miss the Easy Pedal Wiring Guide.



--

Welcome to my informational signature:

See our Home Page for all Guides!

Check the Layout Gallery section of the Forum and find your project before building.

Pre-Build Reading Guides:  Crash Course#1 , Crash Course#2 & Tips, Tricks and Tutorials.

Troubleshoot threads must have pictures and voltages.

All builds are 100% verified. Be sure to use Genuine Transistors and IC's

Any serious builder should have an Audio Probe to diagnose problems quickly.

When using our Photo Gallery:

  • Read this easy link to learn how to ADD FLASH plugin to your browser.
  • The Upload Photo Button is FLASH. Right click in its location to activate.
  • Here is a Quick Video Tutorial for uploading photos.

Our site will also accept direct links from many other photo host sites as long as they are direct links which must end in .jpg, .png etc. to work.


July 8, 2013 at 5:25 PM Flag Quote & Reply

This topic is closed, no additional posts are allowed.