|Forum Home > Layout Gallery - GuitarPCB Build Documents, Mods and Tips > MINI-ME Build Document|
The new MINI-ME Chorus circuit is based on the warm analog sound of the vintage 70's & 80's chorus pedals. The circuit is isolated into two parts, each separately grounded for noise free operation. It also contains the opportunity to use 16mm On-Board Potentiometers if you wish and will easily fit into a 125B enclosure.
Latest Build Document Uploaded 11/15/2013
Always check the Layout Gallery for any build document updates before building any project!
Demo with Prototype circuit:
Alternate Demo with final circuit:
Disclosure: There are some fake MN3007 chips out there so please buy from a reputable dealer, with a strong return policy! If you are getting signal but cannot dial in the chorus effect using the trimmer (sweet spot) suspect your chip.
GuitarPCB is not responsible for fake MN3007 chips.
A finished build thread for reference:
Here is a Finished Build in a Combo Pedal:
Welcome to my informational signature:
See our Home Page for all Guides!
Check the Layout Gallery section of the Forum and find your project before building.
Troubleshoot threads must have pictures and voltages.
All builds are 100% verified. Be sure to use Genuine Transistors and IC's
Any serious builder should have an Audio Probe to diagnose problems quickly.
When using our Photo Gallery:
Our site will also accept direct links from many other photo host sites as long as they are direct links which must end in .jpg, .png etc. to work.